Profile

College / Department
Teaching areas
Construction Materials, Design of Sustainable/Green Buildings, High Performance Concrete, Composite Materials, Engineering Safety, Engineering Quality Control
Research areas
3D Concrete Printing, Green Buildings, High Performance Concrete Design & Applications in Harsh Environment, Sustainability/Green Buildings Design, Safety, Composite Materials.<br><b>Published over 100 papers in journals and proceedings, three book chapters and co-authored two books. </b>
Education
PhD, Structural Engineering, University of Strathclyde
MS, Structural Engineering, University of Strathclyde
BS, Civil Engineering, University of Technology
Professional experience
Assistant/Associate/Professor at American University of Sharjah, United Arab Emirates(2000 - Present)
Lecturer at University of Paisley ñ Scotland, United Kingdom(1997 - 2000)
Research Fellow at University of Paisley, United Kingdom(1995 - 1997)
Researcher at University of Paisley, United Kingdom(1991 - 1995)
Post-Graduate Study and Teaching Assistant at University of Strathclyde,, United Kingdom(1985 - 1990)
Site Engineer at National Oil Company ñ Basra, Iraq, Iraq(1982 - 1985)
Lecturer at Technical Institute of Basra, Iraq, Iraq(1977 - 1982)
Memberships
Association of Building Engineers, UK, 2008 - 2013
Contact
+971 6 515 2958
Adil Al-Tamimi
Professor
PhD in Civil Engineering, University of Strathclyde, UK
Coordinator of the Institute of Materials Systems “IMS”
IMS was established in 2001 based on the recommendations of GCC Ministers for Public Works and Housing to promote Materials Research and Education.
IMS Objectives are to conduct applied research focused on materials properties and applications in harsh environments; assist governmental departments in establishing local and regional codes of practice; provide independent technical evaluation and consultation services on materials-related issues; enhance education through seminars, conferences and short courses; and establish collaboration with similar centers of excellence worldwide.
Publications
Ghina Zannerni, Kazi Fattah, Adil Al-Tamimi, Ambient-cured geopolymer concrete with single alkali activator, Published, Sustainable Materials and Technologies, 23, 2020
Fatma Afghan, Hamza Al Salem, Adil Al-Tamimi, Design and Evaluation of Green Concrete , Published, 2020
Isam Al Zubaidi, Adil Al-Tamimi, Environmentally friendly process of de-oiling and reactivation of oil refinery spent clay, Published, 2019
Haidar Al haidary, Adil Al-Tamimi, Hashim Al Wakil, The combined use of BIM, IR thermography and HFS for energy modelling of existing buildings and minimising heat gain through the building envelope: a case-study from a UAE building, Published, Advances in Building Energy Research, Published, Dec. 2019, 2019
Adil Al-Tamimi, Develop and evaluate 3D concrete mixtures exposed to UAE environment, Published, 2019
Adil Al-Tamimi, Tarig Ali, Rawan Anoohi, Ahmed Rajput, Kaltham Alkamali , Evaluations of 3D Concrete Printing Produced in the Environment of United Arab Emirates , Published, International Journal of Civil and Environmental Engineering, 13, 12, pp. 705-709. , 2019
Adil Al-Tamimi, Tarig Ali, Rawan Anoohi, Ahmed Rajput, Kaltham Alkamali, Properties and Assessment of 3D Concrete Printing, Published, 2019
Aktham Al Chaar, Adil Al-Tamimi, 3D Concrete Printing in The UAE, Published, 2019
Adil Tamimi, Evaluation of Sustainable SCC Concrete in Harsh Environment, Published, ICOCEM conference that to be held in Double Tree by Hilton Hotel Trabzon in TURKEY on April 20 – 22, 2019., 2019
Adil Tamimi, Nanomaterials and innovations in the production of sustainable concrete materials, Published, 2019
Aktham Al Chaar, Adil Tamimi, 3D Concrete Printing in The UAE, Published, 2019
Ali Mokhtar, Abdalla Ghoneim, Mohammad Al Hafiz, Adil Tamimi, Design and development of 3D concrete mixture, Published, SIXTH INTERNATIONAL CONFERENCE ON WATER, ENERGY AND ENVIRONMENT ICWEE/, 2019
Haitham Al Ajmani, Ferass Suleiman, Ismail Abuzayed, Adil Al-Tamimi, Evaluation of Concrete Strength Made with Recycled Aggregate, Published, BUILDINGS, 9, 3, 2019
Menna Elawady, Nour Barakat, Tala Besiso, Adil Al-Tamimi, ICWEE 2019 Design and Evaluation of Green Concrete using PFA , Published, 2019
Haitham Al Ajmani , Ferass Suleiman , Ismail Abuzayed , Adil Tamimi, Evaluation of Concrete Strength Made with Recycled Aggregate, Published, Buildings, 9, 56, pp. 2-14, 2019
Adil Tamimi, Vian Ahmed, MATURITY MODEL FOR A SUSTAINABLE CONSTRUCTION INDUSTRY _ UNITED ARAB EMIRATES CASE STUDY, Submitted, International Journal of innovation and Sustainable development, 2019
Kazi Fattah, Adil Al-Tamimi, AYDA ALKADI, MIRA AFANEH, MOHAMAD AWADA, ALA’A KHALAF, Self-Cleansing Cement Matrix using Nano Titanium Dioxide, Published, International Journal of Advances in Mechanical and Civil Engineering, 6, 1, pp. 37-41, 2019
Isam Zubaidi, Adil Tamimi, Soil remediation from waste lubricating oil, Published, Environmental Technology and Innovation, 9, pp. 151-159, 2018
Ali Mokhtar, Abdala Ghoneim, Mohamed Al Hafiz, Adil Al-Tamimi, 3D Concrete Printing: Dimension Stability, Published, 2017
Kaltham Alkamali, Ahmed Rajput, Rawan Anoohi, Adil Al-Tamimi, Design of 3D Concrete Printing Mixture: Surface Quality, Published, 2017
Adil Al-Tamimi, Robotics & 3D Concrete Printing in UAE Construction Industry, Published, 2017
Hayder Rasheed, Jamal Abdalla, Rami Hawileh, Adil Al-Tamimi, Flexural behavior of reinforced concrete beams strengthened with externally bonded Aluminum Alloy plates, Published, ENGINEERING STRUCTURES, 147, pp. 473-485, 2017
Ahmed Al-Abdwais, Riadh Al-Mahaidi, Adil Al-Tamimi, Performance of NSM CFRP strengthened concrete using modified cement-based adhesive at elevated temperature, Published, CONSTRUCTION AND BUILDING MATERIALS, 132, pp. 296-302, 2017
Hayder Rasheed, Jamal Abdalla, Rami Hawileh, Adil Al-Tamimi, Flexural behavior of reinforced concrete beams strengthened with externally bonded Aluminum Alloy plates, Published, Engineering Structures, 147, pp. 473-485, 2017
Kazi Fattah, Adil Al-Tamimi, Waseem Hamweyah, Fatima Iqbal, Evaluation of sustainable concrete produced with desalinated reject brine, Published, International Journal of Sustainable Built Environment, 6, 1, pp. 183-190, 2017
Ahmed Al-Abdwais, Riadh Al-Mahaidi, Adil Al-Tamimi, Performance of NSM CFRP strengthened concrete using modified cement-based adhesive at elevated temperature, Published, Construction and Building Materials, 132, pp. 296-302, 2017
Mahbube Subhani, Riyadh Al-Ameri, Adil Al-Tamimi, Assessment of bond strength in CFRP retrofitted beams under marine environment, Published, COMPOSITE STRUCTURES, 140, pp. 463-472, 2016
Al Zubaidi, Isam A. H., Al Tamimi, Adil K., Hussain Ahmed, Remediation of water from crude oil spill using a fibrous sorbent, Published, ENVIRONMENTAL TECHNOLOGY & INNOVATION, 6, pp. 105-114, 2016
Isam Al Zubaidi, Adil Al Tamimi, Hussain Ahmed, Remediation of water from crude oil spill using a fibrous sorbent, Published, Environmental Technology and Innovation, 6, pp. 105-114, 2016
Isam Al Zubaidi, Adil Al Tamimi, Hussain Ahmed, Remediation of water from crude oil spill using a fibrous sorbent, Published, Environmental Technology and Innovation, 6, pp. 105-114, 2016
Mahbube Subhani, Riyadh Al-Ameri, Adil Al-Tamimi, Assessment of bond strength in CFRP retrofitted beams under marine environment, Published, Composite Structures, 140, pp. 463-472, 2016
Ahmed Sharaby, Syed Waqas, Ahmad Nassar, Ahmed Nouh, Adil Al-Tamimi, Integrating sustainability parameters at the American University of Sharjah, Published, 2016-August, 2016
Ahmed Sharaby, Syed Waqas, Ahmad Nassar, Ahmed Nouh, Adil Al-Tamimi, Integrating sustainability parameters at the American University of Sharjah, Published, 2016-August, 2016
Adil Al-Tamimi, Rami Hawileh, Jamal Abdalla, Hayder Rasheed, Riadh Al-Mahaidi, Durability of the Bond between CFRP Plates and Concrete Exposed to Harsh Environments, Published, JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 27, 9, 2015
Ghanim Kashwani, Adil Al-Tamimi, Riyadh Al-Ameri, EVALUATION OF FRP CONCRETE COMPRESSION MEMBER UNDER REPEATED LOAD AND HARSH ENVIRONMENT, Published, INTERNATIONAL JOURNAL OF GEOMATE, 9, 18, pp. 1460-1466, 2015
Rami Hawileh, Adi Abu-Obeidah, Jamal Abdalla, Adil Al-Tamimi, Temperature effect on the mechanical properties of carbon, glass and carbon-glass FRP laminates, Published, CONSTRUCTION AND BUILDING MATERIALS, 75, pp. 342-348, 2015
Magdi El-Emam, Adil Al-Tamimi, A. Aljallad, M, Al-Moukdad, A. Al-Marei, M. Noaman, High strength earth blocks reinforced with natural and polymeric fibres, Published, Proceedings of 16th African Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC’16, pp. 9p., 2015
Rami Hawileh, Adi Abu-Obeidah, Jamal Abdalla, Adil Al-Tamimi, Temperature effect on the mechanical properties of carbon, glass and carbon-glass FRP laminates, Published, Construction and Building Materials, 75, pp. 342-348, 2015
Rami Hawileh, Adi Abu-Obeidah, Jamal Abdalla, Adil Al-Tamimi, Temperature effect on the mechanical properties of carbon, glass and carbon-glass FRP laminates, Published, Construction and Building Materials, 75, pp. 342-348, 2015
Adil Al-Tamimi, Rami Hawileh, Jamal Abdalla, Hayder Rasheed, Riadh Al-Mahaidi, Durability of the bond between CFRP plates and concrete exposed to harsh environments, Published, Journal of Materials in Civil Engineering, 27, 9, 2015
Adil Al-Tamimi, Rami Hawileh, Jamal Abdalla, Hayder Rasheed, Riadh Al-Mahaidi, Durability of the bond between CFRP plates and concrete exposed to harsh environments, Published, Journal of Materials in Civil Engineering, 27, 9, 2015
Adil Al-Tamimi, Rami Hawileh, Jamal Abdalla, Hayder Rasheed, Riadh Al-Mahaidi, Durability of the bond between CFRP plates and concrete exposed to harsh environments, Published, Journal of Materials in Civil Engineering, 27, 9, 2015
Ghanim Kashwani, Adil Al-Tamimi, Riyadh Al-Ameri, Evaluation of FRP concrete compression member under repeated load and harsh environment, Published, International Journal of GEOMATE, 9, 2, pp. 1460-1466, 2015
Ghanim Kashwani, Adil Al-Tamimi, Riyadh Al-Ameri, Evaluation of FRP concrete compression member under repeated load and harsh environment, Published, International Journal of GEOMATE, 9, 2, pp. 1460-1466, 2015
Ghanim Kashwani, Adil Al-Tamimi, Evaluation of FRP bars performance under high temperature, Published, 55, pp. 296-300, 2014
Ghanim Kashwani, Adil Al-Tamimi, Evaluation of FRP bars performance under high temperature, Published, 55, pp. 296-300, 2014
Adil Al-Tamimi, A. Ibrahim, N. Al-Sughaiyer, Evaluation of sustainability of multistory reinforced concrete structure, Published, 55, pp. 445-450, 2014
Adil Al-Tamimi, A. Ibrahim, N. Al-Sughaiyer, Evaluation of sustainability of multistory reinforced concrete structure, Published, 55, pp. 445-450, 2014
Rami Hawileh, Adi Abu-Obeidah, Jamal Abdalla, Adil Al-Tamimi, Residual mechanical properties of carbon & hybrid carbon-glass FRP sheets at elevated temperatures, Published, 2014
Rami Hawileh, Adi Abu-Obeidah, Jamal Abdalla, Adil Al Tamimi, Residual mechanical properties of carbon & hybrid carbon-glass FRP sheets at elevated temperatures, Published, 2014
Rami Hawileh, Adi Abu-Obeidah, Jamal Abdalla, Adil Al-Tamimi, Residual mechanical properties of carbon & hybrid carbon-glass FRP sheets at elevated temperatures, Published, 2014
Rami Hawileh, Hayder Rasheed, Jamal Abdalla, Adil Al-Tamimi, Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems, Published, Materials and Design, 53, pp. 972-982, 2014
Rami Hawileh, Hayder Rasheed, Jamal Abdalla, Adil Al-Tamimi, Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems, Published, Materials and Design, 53, pp. 972-982, 2014
Rami Hawileh, Hayder Rasheed, Jamal Abdalla, Adil Al-Tamimi, Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems, Published, Materials and Design, 53, pp. 972-982, 2014
Isam Al Zubaidy, Adil Al-Tamimi, Production of sustainable pavement with oil sludge, Published, Road Materials and Pavement Design, 15, 3, pp. 691-700, 2014
Isam Al Zubaidy, Adil Al-Tamimi, Production of sustainable pavement with oil sludge, Published, Road Materials and Pavement Design, 15, 3, pp. 691-700, 2014
Farid Abed, Adil Al-Tamimi, Reem Al-Himairee, Characterization and modeling of ductile damage in structural steel at low and intermediate strain rates, Published, Journal of Engineering Mechanics, 138, 9, pp. 1186-1194, 2012
M. Naser, Rami Hawileh, Jamal Abdalla, Adil Al-Tamimi, Bond behavior of CFRP cured laminates: Experimental and numerical investigation, Published, Journal of Engineering Materials and Technology, Transactions of the ASME, 134, 2, 2012
Adil Al-Tamimi, Rami Hawileh, Jamal Abdalla, Hayder Rasheed, Effects of ratio of CFRP plate length to shear span and end anchorage on flexural behavior of SCC RC beams, Published, Journal of Composites for Construction, 15, 6, pp. 908-919, 2011
Salwa Beheiry, Ghassan Abu-Lebdeh, Md. Mortula, Adil Al-Tamimi, Integrating Sustainability Education in a Classical Civil Engineering Program: The Case of Transportation and Construction Courses, Published, Advanced Materials Research, 347, 353, pp. 2921-2932, 2011
Rami Hawileh, Jamal Abdalla, Adil Al-Tamimi, Khalid Abdelrahman, Fadi Oudah, Behavior of corroded steel reinforcing bars under monotonic and cyclic loadings, Published, Mechanics of Advanced Materials and Structures, 18, 3, pp. 218-224, 2011
Reem Al-Himairee, Farid Abed, Adil Al-Tamimi, Damage evolution in structural steel at different loading conditions, Published, 471-472, pp. 969-974, 2011
Rami Hawileh, Jamal Abdalla, Adil Al-Tamimi, Flexural performance of strengthened RC beams with CFRP laminates subjected to cyclic loading, Published, 471-472, pp. 697-702, 2011
Rami Hawileh, Adil Al-Tamimi, Jamal Abdalla, M. Wehbi, Retrofitting pre-cracked RC beams using CFRP and epoxy injections, Published, 471-472, pp. 692-696, 2011
Adil Al-Tamimi, Md. Mortula, Ghassan Abu-Lebdeh, Salwa Beheiry, Evaluations of Sustainable Concepts in Civil Engineering Program., Published, The Built and Human Environment Review, 4, 1, pp. 1, 2011
M. Naser, Rami Hawileh, Jamal Abdalla, Adil Al-Tamimi, Finite Element Modeling of CFRP Plate Bonded to Concrete Surfaces, Published, 2010
Grants and sponsorships
Durability of 3D Concrete Printing, Local, 2021
Design & Development of 3D Concrete Printing in UAE, American University of Sharjah, 2021
Production of Acidic Biochar for Soil Application, Federal, 2020
Design of Concrete Mix and Performance Of Anchors in Structures, Private, 2019
Awards and Honors
Received, FRG , AUS, 2019
Received, Consultation Contract with Hilti, Hilti Marketing Competence Center Middle East | Near East and Eastern Africa, 2019
Received, Trophy and Certificate, RAK Cement Factory, 2018